SLP2950 Datasheet, PDF (2/3 Pages) SeCoS Halbleitertechnologie GmbH – Voltage Regulator

Elektronische Bauelemente
SLP2950
100mA Low-Dropout
Voltage Regulator
Electrical Characteristics (TJ=25к, VIN=6V, IO=100 A, and Co=1 F, unless otherwise specified)
Parameter
Symbol
Condition
Min TYP Max Unit
Output Voltage
VOUT SLP2950-25
2.45 2.5 2.55
SLP2950-30
2.94 3.0 3.06
SLP2950-33
100 AЉIOЉ100mA
TJЉTJMAX
3.23
3.3
3.36
V
SLP2950-36
3.53 3.6 3.67
SLP2950-50
4.90 5.0 5.10
Line Regulation
REGLINE
VO+1ЉVINЉ30V
- 0.04 0.4
%
Load Regulation
REGLOAD
100 AЉIOЉ100mA
-
0.1 0.3
%
Current Limit
ILIM
VOUT=0
- 160 200 mA
Output Voltage
Temperature Coefficient
TC
-
20
ppm/к
Dropout Voltage
VDROPOUT
IO=100 A
IO=100mA(Note1)
-
50
80
mV
- 380 450
Ground Current
IQ
IO=100 A
IO=100mA
-
75 120
A
-
8
12
mA
Dropout Ground Current
VIN=VO-0.5V, IO=100 A
-
110 170
A
Output Voltage Noise
f=10Hz~100kHz
eN
Co=1 F
Co=200 F
-
430
-
V
-
160
-
Note 1: Dropout Voltage is defined as the input to output differential at which the output voltage drops 100mV below its nominal value
measured at 1V differential.
Characteristics Curve
Fig 1. Dropout Characteristics
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
Fig 2. Input Current
Any changing of specification will not be informed individual
Page 2 of 3