1N47XXAG_15 Datasheet, PDF (2/2 Pages) SeCoS Halbleitertechnologie GmbH – Hermetically Sealed Glass Zener Voltage Regulators

Elektronische Bauelemente
Typical Characteristics Curve
1N47xxAG Series
VOLTAGE 3.3 ~ 56 V, 1 W
Hermetically Sealed Glass Zener Voltage Regulators
Notes:
1. Tolerance and type number designation (V_Z): The type numbers listed have a standard tolerance on the nominal zener voltage of ± 5%.
2. Specials available include: Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price,
availability and delivery, contact you nearest SeCoS representative.
3. Zener voltage (V_Z) measurement: The zener voltage (V_Z) is tested under pulse condition. The measured V_Z is guaranteed to be within
specification with device junction in thermal equilibrium.
4. Zener impedance (Z_Z) derivation: The zener impedance is derived from the 60 cycle AC voltage, which results when an AC current
having an RMS value equal to 10% of the DC zener current (I_ZT or I_ZK) is superimposed on I_ZT or I_ZK.
http://www.SeCoSGmbH.com/
26-May-2010 Rev. B
Any changes of specification will not be informed individually.
Page 2 of 2