SMF1001D1 Datasheet, PDF (1/2 Pages) SeCoS Halbleitertechnologie GmbH – 10.0AMP Surface Mount Fast Recovery Rectifiers

Elektronische Bauelemente
SMF1001D1 THRU SMF1007D1
VOLTAGE 50V ~ 1000V
10.0AMP Surface Mount Fast Recovery Rectifiers
RoHS Compliant Product
A suffix of "-C" specifies halogen-free
TO-252
FEATURES
* Ideal for surface mount applications
2
* Easy pick and place
* Built-in strain relief
* Fast switching speed
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Metallurgically bonded construction
* Polarity: Color band denotes cathode end
* Mounting position: Any
PIN 1
PIN 3
2
1
3
PIN 2
CASE
REF.
A
B
C
D
E
F
S
Millimeter
Min.
Max.
6.40
6.80
5.20
5.50
6.80
7.20
2.20
2.80
2.30 REF.
0.70
0.90
0.60
0.90
REF.
G
H
J
K
L
M
R
Millimeter
Min. Max.
0.50 0.70
2.20 2.40
0.45 0.55
0
0.15
0.90 1.50
5.40 5.80
0.80 1.20
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
SMF1001D1 SMF1002D1 SMF1003D1 SMF1004D1SMF1005D1SMF1006D1 SMF1007D1 UNITS
50 100 200 400 600 800 1000 V
35
70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
.375"(9.5mm) Lead Length at Ta=55 C (Per Leg 5.0A)
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 5.0A
Maximum DC Reverse Current
Ta=25 C
10.0
A
100
A
1.3
1.5
1.7
V
10
uA
at Rated DC Blocking Voltage
Ta=100 C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Thermal Resistance, Juntion to Lead (Note 3)
Thermal Resistance, Juntion to Ambient (Note 3)
Operating and Storage Temperature Range TJ, TSTG
0.5
150
250
44
8
30
-65 ~ +150
mA
500
nS
pF
C/W
C
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Rating applies when surface mounted on the minimum pad size recommended, PC Board with 8.0 X 8.0mm copper pad.
http://www.SeCoSGmbH.com
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 1 of 2