SMA6J Datasheet, PDF (1/4 Pages) STMicroelectronics – High junction temperature Transil TM

Elektronische Bauelemente
SMA6J SERIES
5V ~ 85V, 600W
Peak Power Surface Mount TVS
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and lead-free
FEATURES
Glass passivated chip
600W peak pulse power capability with a 10/1000 µs waveform
Low leakage
Uni- and Bi-directional unit
Excellent clamping capability
Very fast response time
PACKAGE INFORMATION
Package
MPQ
SMA
5K
Leader Size
13 inch
SMA
B
A
C
H
D
GE
F
REF.
A
B
C
D
Millimeter
Min. Max.
1.24 1.65
3.99 4.75
2.40 2.90
1.90 2.44
REF.
E
F
G
H
Millimeter
Min. Max.
-
0.203
4.80 5.28
0.76 1.52
0.15 0.31
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.)
Rating
Symbol
Value
Peak Power Dissipation@ a 10/1000µs waveform ¹
PPK
Peak Pulse Current@ a 10/1000µs waveform ¹
IPP
600
See next table
Power Dissipation@ on a infinite heat sink at TL=75°C
PD
3
Peak Forward Surge Current@ 8.3ms single Half
Sine-Wave, for unidirectional only ²
IFSM
60
Maximum Instantaneous Forward voltage@ at 25A
for unidirectional only
VF
3.5
Operating Junction and Storage Temperature Range
TJ, TSTG
-55 ~ 150
Notes:
1. Non-repetitive current pulse is on Fig. 5 and it derates above TA=25°C on Fig. 1.
2. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
Unit
W
A
W
A
V
°C
http://www.SeCoSGmbH.com/
28-Jun-2016 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 4