SGP34063 Datasheet, PDF (1/6 Pages) SeCoS Halbleitertechnologie GmbH – DC To DC Converter Controller

Elektronische Bauelemente
SGP34063
DC To DC Converter Controller
RoHS Compliant Product
Description
The SGP34063 is a monolithic regulator subsystem,
intended for use as DC to DC conv erter.
This device contains a temperature compensated
band gap reference, a duty-cycle control oscillator,
driver and high current output switch. It can be used for
step-down, step-up or inverting switching regulators
as well as for series pass regulators.
Features
*Operation from 3.0V to 40V.
*Short circuit current limiting.
*Low standby current.
*Output switch current of 1.5A without external transistors.
*Frequency of operation from 100Hz to 100kHz.
*Step-up, step-down or inverting switch regulators.
DIP-8
9.017
10.160
Gauge Plane
6.096
7.112
7.620
10.92 max. _8.255
0.762
1.143
0.381 min.
(seating plane)
0.356
1.143 ^0.559
2.921
4.953
1.778
2.540
BSC
0.5334 max.
2.921
3.810
Dimensions in mm
MARKING
8765
34063
xxxx
Datecode
1234
Pin Configuration & Representative Schematic Diagram
rogrammed by
pacitor CT to ground .Operation 500kHz
nts up to
This is the reference output .It provides charging current for capacitor CT
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 1 of 5