S2FL Datasheet, PDF (1/4 Pages) SeCoS Halbleitertechnologie GmbH – 5V ~ 220V 200W Peak Power Surface Mount TVS

Elektronische Bauelemente
S2FL SERIES
5V ~ 220V
200W Peak Power Surface Mount TVS
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and lead-free
FEATURES
 Glass passivated chip
 Low leakage
 Uni and Bidirectional unit
 Excellent clamping capability
 Very fast response time
 RoHS compliant
B
 200 W peak pulse power capability with a 10/1000 μs waveform,
repetitive rate (duty cycle):0.01 %
SOD-123FL
A
F
G
MECHANICAL DATA
 Epoxy : UL94V-0 rate flame retardant
 Case : SOD-123FL
 Lead: Solderable per MIL-STD-750,method 2026
 Polarity : Color band denotes cathode end except Bipolar
 Mounting Position : Any
 Weight : 0.0152 grams(approximate)
PACKAGE INFORMATION
Package
MPQ
SOD-123FL
3K
Leader Size
7 inch
C
E
D
REF.
A
B
C
D
Millimeter
Min.
2.60
1.60
0.81
3.50
Max.
3.10
2.00
1.55
3.90
REF.
E
F
G
Millimeter
Min.
0.10
0.80
0.35
Max.
0.30
1.35
0.85
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, de-rate current by 20%.)
Ratings
Symbol
Value
Peak power dissipation with a 10/1000μs waveform ¹
Peak pulse current wih a 10/1000μs waveform ¹
P_PP
200
I_PP
See Next Table
Power dissipation on infinite heatsink at T_L = 70 °C
P_D
0.4
Peak forward surge current, 8.3 ms single half sine-wave
unidirectional only ²
I_FSM
20
Maximum instantaneous forward voltage at 25 A for unidirectional
only
V_F
3.5
Operating junction and storage temperature range
T_J, T_STG
-55 ~ 150
Notes:
1. Non-repetitive current pulse per Fig.5 and derated above T_A= 25 °C per Fig.1.
2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
Units
W
A
W
A
V
°C
http://www.SeCoSGmbH.com/
10-Feb-2017 Rev. B
Any changes of specification will not be informed individually.
Page 1 of 4