D25SB10 Datasheet, PDF (1/2 Pages) Leshan Radio Company – Maximum Ratings & Thermal Characteristics Ratings at 25℃ ambient temperature unless otherwise specified.

Elektronische Bauelemente
D25SB10 ~ D25SB100
100 V ~ 1000 V
25.0 Amp High Current Glass Passivated
Molding Single-Phase Bridge Rectifier
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and RoHS Compliant
FEATURES
 Plastic Package has Underwriters
Laboratory Flammability Classification 94V-0
 This Series is UL listed under the Recognized Component index,
file number E231047
 Single-in-line package
 High current capacity with small package
 Superior thermal conductivity
 High temperature soldering guaranted：
260°C / 10 seconds
R
C
 High IFSM
A
J
D5-25SB
GB _{H F}
N
K
O
MD
E
P
S LL
REF.
A
B
C
D
E
G
J
F
Millimeter
Min.
29.7
19.7
4.4
Max.
30.3
20.3
4.8
17.0 18.0
0.6
0.8
5 REF.
3.4
3.8
3.3
3.7
REF.
K
L
N
P
O
R
S
H
Millimeter
Min.
2.6
7.3
2.3
Max.
2.8
7.7
2.7
0.9
1.1
2.0
2.4
3 X 45°
9.8
10.2
10.8 11.2
MAXIMUM RATINGS (T_A=25℃ unless otherwise noted)
PART NUMBERS
PARAMETERS
D25SB D25SB D25SB D25SB D25SB D25SB
SYMBOL ₁₀
20
40 60
80 100
Maximum repetitive voltage
RBV RBV RBV RBV RBV RBV
2502S 2503S 2504S 2505S 2506S 2507S
V_RM
100 200 400 600 800 1000
Maximum DC reverse current at @TA=25°C
rated DC blocking voltage
@T_A=125°C
I_R
Average rectified forward
@T_C=98°C
current 60Hz Sine wave
I_O
Resistance load
@T_A=25°C
10
500
25 ⁽¹⁾
3.5 ⁽²⁾
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load
I_FSM
350
Maximum Instantaneous
Forward Voltage @ 12.5A
V_F
1.1
Dielectric strength terminals to case,
AC 1 minute Current 1mA
Vdia
2.5
UNITS
V
A
A
A
V
KV
Maximum thermal ^{on P.C.B without heat-sink}
R_θJA
Resistance per leg _{on AI plate heat-sink}
R_θJC
22 ⁽²⁾
1.0 ⁽¹⁾
°C / W
Operating and Storage Temperature Range
T_J , T_STG
150 , -40 ~ 150
°C
Mounting torque
Tor
Rating Torque：0.8N.m
N.m
Notes：
(1) Unit case mounted on AI plate heat-sink
(2) Unites mounted on P.C.B. without heat-sink
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat
transfer with #6 screw {heat-sink size：12.4 * 15.2 * 12.8cm}
http://www.SeCoSGmbH.com/
06-Aug-2010 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 2