5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

Elektronische Bauelemente
5KP SERIES
Voltage 5.0V ~ 250V
5000W Peak Power TVS
A suffix of "-C" specifies halogen & RoHS compliant
DESCRIPTION
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
R-6
lightning and other transient voltage events.
FEATURES
V_BR @T_J = V_BR@25°C x (1+ αT x (T_J - 25))
(αT:Temperature Coefficient)
Glass passivated chip junction in P600 package
5000W peak pulse capability at 10/1000µs waveform,
repetition rate (duty cycles):0.01%
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Low incremental surge resistance
Typical I_R less than 2µA above 12V
High temperature soldering guaranteed: 260°C/40 se conds / 0.375”,
(9.5mm) lead length, 5 lbs., (2.3kg) tension
Plastic package has underwriters laboratory flammability classification 94V-O
Matte tin lead–free plated
Halogen free and RoHS compliant
2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01
APPLICATIONS
TVS devices are ideal for the protection of I/O interfaces,
V_CC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
C
A
B
D
A
REF.
A
B
C
D
Millimeter
Min. Max.
25.4 REF
8.6
9.1
8.6
9.1
1.2
1.3
Functional Diagram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(TA=25°C unless otherwise noted)
Parameter
Symbol
Value
Peak Pulse Power Dissipation by 10/1000µs Test Waveform ¹
PPPM
5000
Power Dissipation on infinite heatsink at TL=75°C
PD
Peak Forward Surge Current, 8.3ms single half sine-wave
unidirectional only ²
IFSM
Maximum Instantaneous Forward Voltage at 100A for
Unidirectional Only ³
VF
8.0
400
3.5/5.0
Typical Thermal Resistance Junction to Lead
RθJL
8.0
Typical Thermal Resistance Junction to Ambient
RθJA
40
Operating and Storage Temperature Range
TJ, TSTG
-55 ~ 175
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TA = 25°C per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
3. VF<3.5V for devices of VBR≤200V and VF<5.0V for devices of VBR≥201V.
06-Jul-2015 Rev.A
Unit
W
W
A
V
°C/W
°C/W
°C
Page 1 of 4