1.5KE6.8A Datasheet, PDF (1/3 Pages) MDE Semiconductor, Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Elektronische Bauelemente
1.5KE SERIES
Voltage 6.8V ~ 440V
1500W Peak Power / 5.0W Steady State
1500W Peak Power TVS
RoHS compliant
A suffix of "-C" specifies halogen & lead-free
FEATURES
 1500 Watts Surge Capability at 1ms.
 Excellent clamping capability.
 Low zener impedance.
 Fast response time：Typically less than
1.0ps from 0 volt to BV min.
 Typical I_R less than 1 A above 10 V
 High temperature soldering guaranteed：
260°C / 10 seconds / .375” (9.5mm) lead
length, 5lbs.(2.3kg) tension.
DO-201
C
A
B
MECHANICAL DATA
 Case:：Molded plastic.
 Epoxy：UL 94V-0 rate flame retardant.
 Lead：Axial leads, solderable per MIL-STD-202,
method 208 guaranteed.
 Polarity：Color band denotes cathode end
 Mounting position：Any
 Weight：1.20 grams (Approximate)
D
A
REF.
A
B
C
D
Millimeter
Min. Max.
27.2 27.8
7.40 7.60
4.40 4.60
1.15 1.25
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz. resistive or inductive load.
For capacitive load, derate current by 20%.
CHARACTERISTIC
SYMBOL
VALUE
Peak Power Disipation at T_A=25°C, T_P=1ms ⁽¹⁾
P_PK
Minimum 1500
Steady State Power Dissipation at T_L=75°C
Lead Length .375” (9.5mm) ⁽²⁾
P_D
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave superimposed on rated load
I_FSM
(JEDEC method) ⁽³⁾
Operating and Storage Temperature Range
T_J, T_STG
Notes:
1. Non-repetitive current pulse per Fig. 3 and derated above T_A=25°C per Fig. 2.
2. Mounted on Copper Pad area of 0.8” X 0.8” (20mm X 20mm) per Fig. 5.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
6.5
200.0
-55 to +150
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru 1.5KE440.
2. Electrical characteristics apply in both directions.
UNITS
W
W
A
°C
06-Sep-2010 Rev. C
Page 1 of 3