English
Language : 

1.5KE Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Elektronische Bauelemente
1.5KE SERIES
Voltage 6.8V ~ 550V
1500W Peak Power / 5.0W Steady State
1500W Peak Power TVS
A suffix of "-C" specifies halogen & RoHS compliant
FEATURES
1500 Watts Surge Capability at 1ms.
Excellent clamping capability.
Low zener impedance.
Fast response time:Typically less than
1.0ps from 0 volt to BV min.
 Typical IR less than 1 A above 10 V
 High temperature soldering guaranteed:
260°C / 10 seconds / .375” (9.5mm) lead
length, 5lbs.(2.3kg) tension.
MECHANICAL DATA
Case: DO-27
Epoxy:UL 94V-0 rate flame retardant.
Lead:Axial leads, solderable per MIL-STD-202,
method 208 guaranteed.
Polarity:Color band denotes cathode end
Mounting position:Any
DO - 27
C
A
B
D
A
REF.
A
B
C
D
Millimeter
Min. Max.
25.4 (TYP)
7.20 9.50
4.80 5.60
0.96 1.32
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Maximum Ratings @ TA = 25°C)
CHARACTERISTIC
SYMBOL
Peak Power Disipation at TA=25°C, TP=1ms 1
PPK
Steady State Power Dissipation at TL=75°C Lead Length .375”
(9.5mm) 2
PD
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave superimposed on rated load (JEDEC method) 3
IFSM
Operating and Storage Temperature Range
TJ, TSTG
Notes:
1. Non-repetitive current pulse per Fig. 3 and derated above TA=25°C per Fig. 2.
2. Mounted on Copper Pad area of 0.8” X 0.8” (20mm X 20mm) per Fig. 5.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
VALUE
Minimum 1500
6.5
200
-55 ~150
UNITS
W
W
A
°C
http://www.SeCoSGmbH.com/
24-Nov-2014 Rev. E
Any changes of specification will not be informed individually.
Page 1 of 3