SS2413 Datasheet, PDF (5/9 Pages) SEC Electronics Inc. – Hall Latch - High Sensitivity

SS2413
Hall Latch - High Sensitivity
General Electrical Specifications
DC Operating Parameters T_A = 25°C, V_DD= 2.5V to 24V (unless otherwise specified)
Parameter
Symbol Test Conditions
Min Typ Max Units
Supply Voltage
Supply Current
Output Saturation Voltage
Output Leakage Current
V_DD
I_DD
V_DSon
I_OFF
Operating
B < B_RP
I_OUT = 20mA, B > B_OP
B < B_RP V_OUT = 24V
2.5
3.5
120
1
24
V
5
mA
180 mV
10 µA
Output Rise Time
tr
RL = 1kΩ, CL = 20pF
0.15
µs
Output Fall Time
tf
RL = 1kΩ, CL = 20pF
0.15
µs
Maximum Switching Frequency
F_SW
---
20
KHz
Package Thermal Resistance
R_TH Single layer (1S) Jedec board
250
°C/W
Note: The output of SS2413 will be switched after the supply voltage is over 2.2V, but the magnetic characteristics won't be normal
until the supply is over 2.5V.
Magnetic Specifications
DC Operating Parameters V_DD = 2.5 to 24V (unless otherwise specified)
Package Parameter
Symbol Test Conditions
Operating Point B_OP
Ta=25°C
UA
Release Point
B_RP
V_dd=5V DC
Hysteresis
B_HYST
Operating Point B_OP
Ta=25°C
SO
Release Point
B_RP
V_dd=5V DC
Hysteresis
B_HYST
Min Typ Max Units
5
30 55
G
-55 -30 -5
G
60
G
-55 -30 -10
G
5
30 55
G
60
G
Output Behavior versus Magnetic Pole
DC Operating Parameters TA = -40°C to 150°C, V_DD = 2.5 to 24V (unless otherwise specified)
Test Conditions (UA) Test Conditions (SO) OUT
B < B_RP
B > B_RP
High
B > B_OP
B < B_OP
Low
The SOT-23 device is reversed from the UA package. The SOT-23 output transistor will be turned on(drops low) in the presence of a
sufficiently strong North pole magnetic field applied to the marked face and turned off(hoists high) in the presence of a sufficiently
strong South pole magnetic field.
5
V3.10 Jan 1, 2014