SS539_1311 Datasheet, PDF (3/5 Pages) SEC Electronics Inc. – Bipolar Hall-Effect Position Sensor

SS539
Bipolar Hall-Effect Position Sensor
General Electrical Specifications
DC Operating Parameters T_A = 25°C, V_DD= 4.5V to 24V (unless otherwise specified)
Parameter
Symbol Test Conditions
Min Typ Max Units
Supply Voltage
Supply Current
Output Saturation Voltage
Output Leakage Current
Output Rise Time
Output Fall Time
V_DD
I_DD
V_DSon
I_OFF
t_r
t_f
Operating
B < B_RP
I_OUT = 20mA, B > B_OP
B < B_RP V_OUT = 24V
R_L = 1KΩ, C_L = 20pF
R_L = 1K Ω, C_L = 20pF
4.5
24 V
5 10 mA
0.4 0.5 V
0.01 5 µA
0.3 1.5 µs
0.3 1.5 µs
Magnetic Specifications
DC Operating Parameters V_DD = 4.5 to 24V (unless otherwise specified)
Package Parameter
Symbol Test Conditions
Operating Point B_OP
UA
Release Point
B_RP
Ta=25°C V_dd=5V DC
Hysteresis
B_HYST
Operating Point B_OP
SO
Release Point
B_RP
Ta=25°C V_dd=5V DC
Hysteresis
B_HYST
Min Typ Max Units
5
70
G
-70
-5
G
90
G
-70
-5
G
5
70
G
90
G
Output Behavior versus Magnetic Pole
DC Operating Parameters TA = -40°C to 150°C, V_DD = 4.5 to 24V (unless otherwise specified)
Test Conditions (UA) Test Conditions (SO) OUT
B < B_RP
B > B_RP
High
B > B_OP
B < B_OP
Low
The SOT-23 device is reversed from the UA package. The SOT-23 output transistor will be turned on(drops low) in the presence of a
sufficiently strong North pole magnetic field applied to the marked face and turned off(hoists high) in the presence of a sufficiently
strong South pole magnetic field.
3
V3.10 Nov 1, 2013