SS579 Datasheet, PDF (1/8 Pages) SEC Electronics Inc. – Hall Latch - High Sensitivity

Packages
3 pin SOT23 (suffix SO)
SS579
Hall Latch - High Sensitivity
3 pin SIP (suffix UA)
Features and Benefits
– Wide operating voltage range from 3.5V to
24V
– High magnetic sensitivity – Multi-purpose
– CMOS technology
– Low current consumption
– Chopper-stabilized amplifier stage
– Open drain output
– Superior temperature stability
– Insensitive to physical stress
– SOT23 3L and flat SIP 3L
both RoHS Compliant packages
Functional Block Diagram
V_DD
Voltage
Regulator
Chopper
OUT
Application Examples
– Automotive, Consumer and Industrial
– Solid-state switch
– Brushless DC motor commutation
– Speed detection
– Angular position detection
– Linear position detection
– Proximity detection
Hall
Plate
GND
General Description
SIP Package
Pin 1 – VDD
Pin 2 – GND
Pin 3 – OUT
SOT Package
Pin 1 – VDD
Pin 2 – OUT
Pin 3 – GND
The SS579 is a Hall-effect sensor IC fabricated from
mixed signal CMOS technology. The device inte-
grates a voltage regulator, Hall sensor with dynamic
offset cancellation system, Schmitt trigger and an
open-drain output driver, all in a single package.
It incorporates advanced chopper stabilization techniques to provide accurate and stable magnetic switch points.
There are many applications for this HED - Hall Electronic Device - in addition to those listed above. The design,
specifications and performance have been optimized for commutation applications in 5V and 12V brushless DC
motors.
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in
automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor (SOT) for surface mount process or in a Plastic Single In
Line (TO92) for through- hole mount. Both 3-lead packages are RoHS compliant.
1
V3.10 Nov 1, 2013