SS559 Datasheet, PDF (1/8 Pages) SEC Electronics Inc. – Hall Latch - High Sensitivity

Packages
3 pin SOT23 (suffix SO)
3 pin SIP (suffix UA)
SS559
Hall Latch - High Sensitivity
Features and Benefits
– Wide operating voltage range from 2.5V to 24V
– High magnetic sensitivity – Multi-purpose
– CMOS technology
– Low current consumption
– Chopper-stabilized amplifier stage
– Open drain output
– Superior temperature stability
– Insensitive to physical stress
– Tiny SOT23 3L or flat SIP 3L
both RoHS Compliant packages
Functional Block Diagram
VDD
Voltage
Regulator
Chopper
OUT
Application Examples
– Automotive, Consumer and Industrial
– Solid-state switch
– Brushless DC motor commutation
– Speed detection
– Angular position detection
– Linear position detection
– Proximity detection
Hall
Plate
GND
SIP Package
Pin 1 – V_DD
Pin 2 – GND
Pin 3 – OUT
SOT Package
Pin 1 – V_DD
Pin 2 – OUT
Pin 3 – GND
General Description
The SS559 is a unipolar Hall-effect sensor IC fabricated
from mixed signal CMOS technology. The device
integrates a voltage regulator, Hall sensor with dynamic
offset cancellation system, Schmitt trigger and an
open-drain output driver, all in a single package.
It incorporates advanced chopper stabilization techniques to provide accurate and stable magnetic switch points. There
are many applications for this HED - Hall Electronic Device - in addition to those listed above. The design,
specifications and performance have been optimized for commutation applications in 5V and 12V brushless DC
motors.
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in
automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor (SOT) for surface mount process or in a Plastic Single In Line
(SIP 3L flat) for through- hole mount. Both 3-lead packages are RoHS compliant.
1
V2.10 May 1, 2012