|
SS1072 Datasheet, PDF (1/5 Pages) SEC Electronics Inc. – Unipolar Hall-Effect Digital Switch | |||
|
Packages
3 pin SOT23 (suffix SO)
SS1072
Unipolar Hall-Effect Digital Switch
3 pin SIP (suffix UA)
Features and Benefits
â 4.5V to 24V Operation
â -40°C to 150°C Superior temperature
operation
â Bipolar technology
â Open-collector 25 mA output
â Reverse battery protection
â Solid-state reliability
â Resistant to physical stress
â Small Size SOT23 3L or SIP 3L
â Activate with small, commercially available
Permanent magnets
Functional Block Diagram
VDD
Voltage
Regulatr
Chopper
OUT
Application Examples
â Automotive, Consumer and Industrial
â Solid-state switch
â Brushless DC motor commutation
â Speed detection
â Angular position detection
â Linear position detection
â Proximity detection
Hall
Plate
GND
General Description
The SS1072 is a unipolar Hall-effect sensor IC fabri-
cated from bipolar technology. The device integrates a
voltage regulator, reverse battery protection diode, Hall
sensor with dynamic offset cancellation system, tem-
perature compensation circuitry, small signal amplifier,
Schmitt trigger and an open-collector output to sink up
to 25 mA. With suitable output pull up, they can be
used with bipolar or CMOS logic circuits
These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to oper-
ate continuously over extended temperatures to +150°C, and are more stable with both temperature and supply volt-
age changes. The unipolar switching characteristic makes these devices ideal for use with a simple bar or rod mag-
net.
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in
automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor (SOT) and in a Plastic Single In Line ( SIP 3L flat). Both
3-lead packages are RoHS compliant.
1
V3.10 Nov 1, 2013
|
▷ |