SE9014 Datasheet, PDF (9/11 Pages) Seaward Electronics Inc. – Standalon Linear Lithum Battery Charger

Applications
No-load indications
Put a 1uF capacitor between BAT and GND. This
makes up of a No-load indications circuit as
shown below. If there is not a battery connected
to BAT and GND of SE9014 then we can see that
LED-R will be flashing at 2.5 Hz/S. If there is a
battery connected to BAT and GND Pin of
SE9014. Then SE9014 enters normal charging
cycle.
Revision 9/12/2014
Preliminary and all contents are subject to change without prior notice
© Seaward Electronics Inc., 2014. • www.seawardinc.com.cn • Page 9