SE9205 Datasheet, PDF (2/4 Pages) Seaward Electronics Inc. – Four-Channel ESD-Protection IC

Absolute Maximum Ratings⁽¹⁾
Supply Input Voltage (VDD) ..…….……………… +5V
Power Dissipation (PD) ……….. Internally Limited ⁽³⁾
Junction Temperature (TJ) …….…………...... 150°C
Lead Temperature (soldering, 5 sec.) …....…. 260°C
Storage Temperature (TS) ……….. -40°C to +150°C
Electrical Characteristics (T_J = 25°C)
Symbol
Parameter
V_DD
I_LEAK
Reverse Standaoff Voltage
Reverse Standaoff Leakage current
Signal Clamp Voltage
Operating Ratings⁽²⁾
Supply Input Voltage (VDD) …...…………………. 5.0V
Junction Temperature (TJ) ……….….. 0°C to +125°C
Package Thermal Resistance
230°C/W (SOT-23-6L)
Conditions Min
I = 10μA
--
V = 5.0V
Typ Max
5
-
1
100
Units
V
nA
V_C
Positive
Negative
I =10mA
I = 10mA
5.6
6.8
8
V
-1.2 -0.8 -0.4
Clamp Voltage during ESD
MIL-STD-883 Method 3015 ( HBM )
8kV
8kV
ESD Test Level ⁽⁴⁾
-- 12
--
V
-- -8
--
IEC-61000-2, Contact Discharge
MIL-STD-883 Method 3015 ( HBM )
20
--
--
kV
30
--
--
Channel-to-GND Capacitance
0V @ 1 MHz
--
4
--
pF
Channel-to-Channel Capacitance
0V @ 1 MHz
--
3
--
pF
Turn on / off time
--
1
--
ns
Temperature Range
Operating
Storage
-40
--
85
℃
-65
--
150
Diode Dynamic Resistance
Forward Conduction
Reverse Conduction
--
1
--
V
--
1.4
--
Note 1: Exceeding the absolute maximum rating may damage the device.
Note 2: The device is not guaranteed to function outside its operating rating.
Note 3: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: P_D(MAX) = (T_J(MAX)
- T_A)/θ_JA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the
regulator will go into thermal shutdown.
Note 4: ESD Voltage applied between channel pins and ground, one pin at a time; all other channel pins are open; all
ground pins are grounded.
Revision 5/23/2007
Preliminary and all contents are subject to change without prior notice
© Seaward Electronics Inc., 2006. • www.seawardinc.com • Page 2