SE5119 Datasheet, PDF (1/6 Pages) Seaward Electronics Inc. – 500mA CMOS LDO Linear Regulator

500mA CMOS LDO Linear Regulator _SE5119
Description
The SE5119 is an efficient linear voltage
regulator. It has extra low dropout voltage. At light
loads the typical dropout voltage is 15mV, at full
load the typical dropout voltage is 800mV. The
output voltage accuracy is better than 2%.
The SE5119 has low ground current at 65uA,
so it can help prolong battery life. The SE5119 is
specially designed for hand-held, battery-powered
devices.
Features
¾ Typical 175mV dropout voltage at 150mA.
¾ Low Ground current at 65uA. (Typ.)
¾ Guaranteed 500mA output over the full
operating temperature range.
¾ Extremely tight load and line regulation.
¾ Low temperature coefficient.
¾ Current and thermal limiting.
¾ No-load stability.
¾ Standard SOT-89-3L package.
Pin Configuration
Top view
123
SOT-89
Applications
¾ Active SCSI terminators.
¾ Post regulators for switching supplies.
¾ Battery chargers.
¾ High-efficiency linear power supplies.
¾ Computer motherboard, display, graphic card
DC/DC converter, such as 5V to 3.3V, 3.3V to
2.8V or 3.3V to 2.5V.
Typical Application
Ordering Information
SE5119 _ _ _
PIN (1=>3): 1. G: OUT/GND/IN
2. N: GND/IN/OUT
Package Type: 1. K: SOT-89-3L
Output Voltage: 1. A: V_OUT = 3.3V
2. B: V_OUT = 2.8V
3. C: V_OUT = 2.5V
4. D: V_OUT = 1.8V
5. E: V_OUT = 1.5V
6. F: V_OUT = 3.0V
All contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2005. • www.seawardinc.com • Page 1