|
SE1484 Datasheet, PDF (1/8 Pages) Seaward Electronics Inc. – 3A 27V Synchronous Buck Converter | |||
|
SE1484
3A 27V Synchronous Buck Converter
General Description
Features
The SE1484 is a monolithic synchronous buck ï® 3A Output Current
regulator. The device integrates 95 mΩ MOSFETS ï® Wide 4.5V to 27V Operating Input Range
that provide 3A continuous load current over ï® Output Adjustable from 0.925V to 0.8Vin
a wide operating input voltage of 4.5V to ï® Up to 93% Efficiency
27V.Current mode control provides fast transient ï® Programmable Soft-Start
response and cycle-by-cycle current limit. An ï® Stable with Low ESR Ceramic Output Capacitors
adjustable soft-start prevents inrush current at turn on. ï® Fixed 340KHZ Frequency
ï® Cycle-by-Cycle Over Current Protection
ï® Short Circuit Protection
ï® Input Under Voltage Lockout
ï® Packageï¼ PSOP-8
Pin Configuration
Applications
ï® Distributed Power Systems
ï® Green Electronics/ Appliances
ï® Notebook Computers
ï® Networking Systems
ï® FPGA, DSP, ASIC Power Supplies
Typical Application
Rev1.0
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., ⢠www.seawardinc.com.cn ⢠Page 1
9/4/2012
|
▷ |