SE100B Datasheet, PDF (1/8 Pages) Seaward Electronics Inc. – QC2.0 Interface Module

SE100B
QC2.0 Interface Module
General Description
Features
SE100B is designed to support QuickCharge QC  Fully supports Quick Charge 2.0
2.0 (QC2.0) specifications. At the same time, it
specification
also supports Apple, Samsung and BC1.2 DCP  Class A: 5 V, 9 V, and 12 V output voltage
(Dedicated Charging Port) compliant devices.  Apple DCP support
It is a low-cost solution to support QC2.0  Samsung DCP support
functions, and various other DCP interfaces  BC1.2 DCP support
devices. SE100B incorporates all necessary  USB battery charging specification revision
functions to add QC2.0 capability to standard
1.2 compatible
Adaptor designs, Portable Battery designs, and  Automatic USB DCP shorting D+ to D- line
Car-charger designs.
 Default 5 V mode operation
SE100B supports the full output voltage range of  Very low power consumption
either Class A or Class B. Optionally Class B can  Less than 1 mW at 5 V output
be inhibited for protecting the battery charger  Supports Chinese Communications Industry
from accidental damage.
Standard YD/T 1591-2009
SE100B automatically detects whether a
connected Powered Device (PD) is QC2.0
capable before enabling output voltage
adjustment. If a PD that is not compliant to ^Applications
QC2.0 is detected the SE100B disables output  Adaptors for smart phones, tablets,
voltage adjustment to ensure safe operation with
netbooks, digital cameras, and bluetooth
legacy 5 V only USB PDs.
accessories
 Portable Battery Packs supporting QC2.0
Pin Configuration
functions
 Car Cargers supporting QC2.0 functions
 Other USB power output ports supporting
QC2.0 functions
Rev1.0
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., • www.seawardinc.com • Page 1
9/4/2012