|
SE100 Datasheet, PDF (1/9 Pages) Seaward Electronics Inc. – QC2.0 Interface Module | |||
|
SE100
QC2.0 Interface Module
General Description
Features
SE100 is designed to support QuickCharge QC 2.0 ï®
(QC2.0) specifications. It is a low-cost solution to
support QC2.0 functions. SE100 incorporates all ï®
necessary functions to add QC2.0 capability to
standard Adaptor designs, Portable Battery designs, ï®
and Car-charger designs.
SE100 supports the full output voltage range of either ï®
Class A or Class B. Optionally Class B can be
inhibited for protecting the battery charger from ï®
accidental damage.
SE100 automatically detects whether a connected ï®
Powered Device (PD) is QC2.0 capable before ï®
enabling output voltage adjustment. If a PD that is not ï®
compliant to QC2.0 is detected the SE100 disables ï®
output voltage adjustment to ensure safe operation ï®
with legacy 5 V only USB PDs.
ï®
Fully supports Quick Charge 2.0
specification
Class A: 5 V, 9 V, and 12 V output
voltage
Class B: 5 V, 9 V, 12 V, and 20 V
output voltage
USB battery charging specification
revision 1.2 compatible
Automatic USB DCP shorting D+ to
D- line
Default 5 V mode operation
Very low power consumption
Less than 1 mW at 5 V output
Fail safe operation
Adjacent pin-to-pin short-circuit fault
Open circuit pin fault
Pin Configuration
Applications
ï® Adaptors for smart phones, tablets,
netbooks, digital cameras, and
bluetooth accessories
ï® Portable Battery Packs supporting
QC.20 functions
ï® Car Cargers supporting QC2.0
functions
ï® Ogther USB power output ports
supporting QC2.0 functions
Rev1.0
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., ⢠www.seawardinc.com ⢠Page 2
9/4/2012
|
▷ |