English
Language : 

10700453 Datasheet, PDF (4/4 Pages) Schurter Inc. – TOUCH SCREEN
5.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of –40°C for 120 hours.
Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
5.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 50°C, 80%RH for 120 hours. Then it is left at the room
temperature for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
5.4 Thermal Shock
Touch panel is put into a test machine at the condition of –40°C for 30 minutes, and then 80°C for 30 minutes. The
process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement
must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6. Durability test:
6.1 Finger touches
Touch panel is hit 36 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per
second. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
7. Optical Performance:
7.1 Optical inspection method and optical defect refer to document Touch Screen Optical Quality Standard.
7.2 Outside to Active Area : any optical defected in this area need to be ignored if no effected to touch screen function.
7.3 Glass defects such as edge chips and scratches refer to Touch Screen Optical Quality Standard.
7.4 Others:
Always store the touch screen in its original shipping container under normal conditions (20~25°C, 65% RH)
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2004 Datum Name
Bearb.
Gepr.
Vert.
22.07.
22.07.
Maurer
Maurer
TOUCH SCREEN
17,1“, 5-Wire
AMT-02505-01
EDV-Datasheet
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
don’t change manually Manufactured by Apex Material Technology Corp.
D 79346 Endingen
H 1070.0453
Blatt 4 von 4 Index: -