10700448 Datasheet, PDF (4/6 Pages) Schurter Inc. – TOUCHSCREEN

5. Environment Specification
5.1 Operating Temperature - 10° C ~ + 60° C Humidity less than 80% RH
5.2 Storage Temperature - 40° C ~ + 80° C at Ambient Humidity
6. Reliability Test
6.1 Exposure to high temperature
Touch panel is put into a test machine at the condition of 80℃ for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of -40℃ for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60℃, 90%RH for 120 hours. Then it is left at the room
temperature for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.4 Thermal Shock
Touch panel is put into a test machine at the condition of -40℃ for 30 minutes, and then 80℃ for 30 minutes. The
process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement
must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2003 Datum Name
Bearb. 24.10. Maurer
Gepr. 24.10. Maurer
TOUCHSCREEN
7“, 4 Wire
Vert.
EDV-Datasheet
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
don’t change manually
Manufactured by Apex Material Technology Corp.
D 79346 Endingen
H 1070,0448
Blatt 4 von 6 Index: a