10700419 Datasheet, PDF (4/5 Pages) Schurter Inc. – TOUCHSCREEN

5. Environment Specification
5.1 Operating Temperature
5.2 Storage Temperature
- 10° C ~ + 60° C
- 20° C ~ + 80° C
Humidity less than 90% RH
at Ambient Humidity
6. Reliability Test
6.1 Exposure to high temperature
Touch panel is put into a test machine at the condition of 80 for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of -20 for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60 , 90%RH for 120 hours. Then it is left at the room
temperature for 24 hours or more. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
6.4 Thermal Shock
Touch panel is put into a test machine at the condition of -20 for 30 minutes, and then 80 for 30 minutes. The
process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement
must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2002 Datum Name
Bearb. 24.10. Maurer
Gepr. 24.10. Maurer
TOUCHSCREEN
5,88“, 4 Wire
Vert.
EDV-Datasheet
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
don’t change manually
Manufactured bei Apex Material Technology Corp.
D 79346 Endingen
H 1070,0419
Blatt 4 von 5 Index: -