PMM Datasheet, PDF (1/3 Pages) Schurter Inc. – IEC Appliance Inlet C14 with Appliance Outlet F, Line Switch 2-pole and Voltage Selector

Power entry modules without line filter
www.schurter.com/pg05
IEC Appliance Inlet C14 with Appliance Outlet F, Line Switch 2-pole and Voltage Selector
PMM
C14
F
70° C
70° C
Description
- Panel Mount:
Snap-in version from rear-side
- 4 Functions:
Appliance Inlet Protection class I, Connector Protection class I, Line
Switch 1‑ or 2‑pole, with or without voltage selector (Jumper)
Approvals
- VDE License Number: 6090
- UL License Number: E96454
- CSA License Number: 38456
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A / 250 VAC; 50 Hz
10 A / 250 VAC; 60 Hz
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
Solder terminal on request
Solder terminals on voltage selector
Snap-in: 0.8/1.5 mm
(other on request)
Thermoplastic, black, UL 94V-2
Characteristics
- Short Mounting Depth
- All single elements are already wired
except voltage selector
- Line switch non-illuminated
- Voltage selector for two voltage ranges
- Insulation cover on the rear-side
- Especially suitable for use in switching power supplies
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Panel thickness 1.0 mm and 1.2 mm
- Unwired (without pc-board), with pin-terminals
- Wired (with pc-board), with flexible wires
- Line switch with other rocker marking
- Without cover
- Voltage selector with other marking
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Appliance Inlet / Appliance
Outlet
Line Switch
Voltage Selectors
C14 acc. to IEC/EN 60320-1
and F acc. to IEC/EN 60320-2-2,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
Rocker switch 1 or 2 pole, non-illumina-
ted, acc. to IEC 61058-1
Technical details
optional jumper, 2 pos.
Connectors