KEC Datasheet, PDF (1/4 Pages) Schurter Inc. – IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector

Power entry modules without line filter
IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector
www.schurter.com/pg05
KEC
Standard or Medical Fuse drawer
Fuse drawer must be ordered separately (see
accessories).
C14
Fuse drawer must be ordered separately (see
accessories).
70° C
Description
- Panel Mount:
Screw-on version from front or rear side, snap-in version from front
side
- 3 Functions:
Appliance Inlet Protection class I, Fuseholder with interchangeable fuse
drawer for Fuse-links 5 x 20 mm or 6.3 x 32 mm 1‑ or 2‑pole, with or
without voltage selector (step switch)
- Quick connect terminals 4.8 x 0.8 mm
- Alternative: version with line filter  KFC
Approvals
- VDE License Number: 40012271
- UL License Number: E93617
- CSA License Number: 38456
Characteristics
- Available with or without internal connections
- The fuse drawer "Fingergrip" can be removed by hand
For added safety "Extra-Safe" fuse drawers are available
Fuse drawer meets requirements of medical standard IEC/EN 60601-1
The fuse drawer can only be opened with the aid of a tool
The fuseholder is accessible from the equipment front
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Fuse drawer with other voltage values
- For protection class II
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A / 250 VAC; 50 Hz
13 A / 125 VAC; 60 Hz ¹⁾
> 3 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm
Thermoplastic, black, UL 94V-0
1) UL/CSA: 1-pole version 13 A, 2-pole version 10 A
Appliance Inlet
Fuseholder
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
Voltage Selectors
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 or 6.3 x 32 mm
5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per
pole
6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole)
per pole
Admissible power acceptance at hig-
her ambient temperature see derating
curves
optional, step, 2-4 digits
Dimensions
Screw on PCB mounting
30
R6
R 4.5
55
4.8x0.8
M3/ø 3.6
58 mm
Snap-in mounting
55
30
R 4.5 4.8x0.8
S^±0.1
R 3.1
27.2
18
2
27.5
2.2
0
R 3 -0.2
+0.2
27.5 0
27.2
R 3.1
Connectors
18
27.5
0
R 3 -0.2
2
27.5
+0.2
0
2.2