FMR Datasheet, PDF (1/1 Pages) Schurter Inc. – Fuseholder Open Design, Holder for MSF 125, horizontal, THT

Fuseholder Blocks & Clips
Fuseholder Open Design, Holder for MSF 125, horizontal, THT
www.schurter.com/pg02b
FMR
125 VAC · 5 A (UL/CSA)
Description
- Through hole mounting
- Horizontal mount
Standards
- UL 512
- CSA C22.2 no. 39
Approvals
- UL File Number: E39328
Technical Data
Fuse-Link
Mounting
Terminal
Rated Voltage
Rated Current
Degree of Protection
Admissible Ambient Air Temp.
Climatic Category
Material: Socket
Material: Terminals
Unit Weight (Socket/Cap)
Storage Conditions
Product Marking
Microfuse 125 V
PCB
Solder THT
125 VAC
5 A (UL/CSA)
IP 40
-40 °C to 85 °C
40/085/21 acc. to IEC 60068-1
Thermoplastic, black, UL 94V-0
Silver-Plated Brass
0.34 g
0 °C to 60 °C, max. 70% r.h.
, Approvals
Abmessungen
11.3 mm
6.6
6.1
References
General Product Information
Fuseholder to  MSF 125
Weblinks
Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check,
Accessories, Product Change Notification (PCN)
Soldering Methods
Solderability
Resistance to Soldering Heat
Contact Resistance
Dielectric Strength
Impulse Withstand Voltage
Insulation Resistance
Overvoltage Category
Pollution Degree
Wave
235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
< 5 mΩ at 20 mV
> 3 kV between L-N
(50 Hz; 1 min)
> 4 kV between L-N
> 10 MΩ between L-N
(500 VDC; 1 min)
I - III acc. to IEC 60664-1
1 - 3 acc. to IEC 60664-1
+0.1
1.3 0
1.05^±0.05
5.08
0.5
2.54
Variants
Holder
Order Number
l
0031.7505
Packaging Unit
Plastic Bag (100 pcs.)
Drilling diagram
2.54
The specifications, descriptions and illustrations indicated in this document are b_Fa_use_sd_eo_sn
current information. All content is subject to modifications and amendments.