DC21 Datasheet, PDF (1/3 Pages) Schurter Inc. – IEC Appliance Inlet C14 with Line Switch 1- or 2-pole

Power entry modules without line filter
IEC Appliance Inlet C14 with Line Switch 1- or 2-pole
www.schurter.com/pg05
DC21
C14
70° C
Description
- Panel Mount:
Screw-on mounting on PCB/ from rear-side
- 2 Functions:
Appliance Inlet Protection class I, Line Switch 2-pole
- For PCB mounting
- Alternative: version with line filter  DC22
Approvals
- VDE License Number: 40007009
- UL License Number: E96454
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A / 250 VAC; 50 Hz
11 A / 125 VAC; 60 Hz
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
For PCB mounting ; Ground terminal:
Quick connect terminals 4.8 x 0.8 mm
Screw: max 3.5 mm
Mounting screw torque max 0.5 Nm
Thermoplastic, black, UL 94V-0
Characteristics
- Ultra-compact design
- All single elements are already wired
Unwired versions available on request
- Line switch non-illuminated or illuminated
- With or without rear-side insulation cover
- Ideal for application with high transient loads
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3
- Other rocker marking
- For protection class II
- Without cover
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, Distributor-Stock-
Check, Accessories
Appliance Inlet
Line Switch
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
Rocker switch 2-pole, non-illuminated
or illuminated, acc. to IEC 61058-1
Technical details
Connectors