|
6200 Datasheet, PDF (1/3 Pages) Schurter Inc. – IEC Appliance Inlet C14 with Fuseholder 1-pole | |||
|
Power entry modules without line filter
IEC Appliance Inlet C14 with Fuseholder 1-pole
Types 6200, 6205
Types 6200, 6205
www.schurter.com/pg05
6200
1-pole
Type 6202: for protection class II
C14
1-pole
70° C
Description
- Panel Mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm
1âpole
- Solder terminals or quick connect terminals
- Alternative: version with line filter  5200Â
- Alternative: Fuseholder 2-pole  6220
Approvals
- VDE License Number: 40011091
- UL License Number: E93617
- CSA License Number: 38456
Characteristics
- All single elements are already wired
- Plug removal necessary for fuse-link replacement
The fuseholder is accessible from the equipment front
With spare fuse compartment
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Types for rivet mounting available upon request
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10âA / 250âVAC; 50âHz
10âA / 250âVAC; 60âHz
> 2âkVAC between L-N
> 2âkVAC between L/N-PE
(1âmin/50âHz)
-25â°C to 70â°C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
Solder terminals or quick connect termi-
nals , tin-plated
Screw: max 6âmm
Mounting screw torque max 0.5âNm
Snap-in: 1/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Appliance Inlet
Fuseholder
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10âA,
Protection Class 1
1-pole, Shocksafe category PC2 acc. to
IEC 60127-6,
for fuse-links 5 x 20âmm
5 x 20: 2âW (1 pole)
Admissible power acceptance at hig-
her ambient temperature see derating
curves
Dimensions
Screw-on mounting types 6200/05
6.3x90°
3.5
2.5
44 mm
Snap-in mounting types 6200/05
36 ±0.1
S ±0.1
36
E
5
44
E: Solder terminals 20.5 mm
E: Quick connect terminals 23.5 mm
M3
max. R3
27.5+00.2
30
E
3
max. R3
27.5
+0.2
0
E: solder terminals 22.5 mm
E: quick-connect terminals 25.5 mm
S: 1.0/1.5/2.0/2.5/3.0 mm
Connectors
|
▷ |