4797 Datasheet, PDF (1/3 Pages) Schurter Inc. – IEC Appliance Outlet J, Snap-in/Screw-on Mounting, Front Side, Solder or Quick-connect Terminal

Connectors (Inlets/Outlets)
www.schurter.com/pg07
IEC Appliance Outlet J, Snap-in/Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
4797
Screw-On Version
J
70° C
Description
- Panel Mount:
Snap-in or screw-on mounting, from front side
- 1 Function:
Connector, Pin temperature 70 °C Protection class I
- Solder terminals or quick connect terminals Substitute for type  0723
Approvals
- UL License Number: E103791
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Protection Class
Terminal
Panel Thickness s
Material: Housing
16 A / 250 VAC; 50 Hz
20 A / 250 VAC; 60 Hz
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
Suitable for appliances with protection
class 1 or 2 acc. to IEC 61140
Solder terminals or quick connect ter-
minals
Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 0.8 mm to 3 mm
Thermoplastic, black, UL 94V-0
Dimensions
Snap-in mounting from front side
Characteristics
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Other panel thickness
- For protection class II
- Types for enhanced glow wire test requirements acc. IEC 60695-2-
11 to -13 for the use in unattended household equipment acc. IEC
60335-1
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Appliance Outlet
J acc. to IEC/EN 60320-2-2
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 16 A,
Protection Class 1
Connectors