4707 Datasheet, PDF (1/3 Pages) Schurter Inc. – IEC Appliance Inlet C14 with Fuseholder 2-pole

Power entry modules without line filter
IEC Appliance Inlet C14 with Fuseholder 2-pole
www.schurter.com/pg05
4707
Plug removal necessary for fuse
replacement
C14
70° C
Description
- Panel Mount:
Screw-on mounting from front or rear-side
- 2 Functions:
Appliance Inlet Protection class I, fuse-links 5 x 20 mm 1‑ or 2‑pole
- Solder terminals 3.8 x 0.8 mm or quick connect terminals 6.3 x 0.8
mm
Approvals
- VDE License Number: 40006816
- UL License Number: E93617
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A / 250 VAC; 50 Hz
10 A / 250 VAC; 60 Hz
> 2 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
Solder terminals or quick connect ter-
minals
Screw: max 6 mm
Mounting screw torque max 0.5 Nm
Thermoplastic, black, UL 94V-0
Characteristics
- All single elements are already wired
- With slotted screw type fuseholder
Fuseholder meets requirements of medical standard IEC/EN 60601-1
The fuseholder can only be opened with the aid of a tool
The fuseholder is accessible from the equipment front
- IP40 (fuseholder IP65)
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- For protection class II
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Appliance Inlet
Fuseholder
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 1.6 W (1 pole)/ 1.6 W (2-pole)
per pole
Admissible power acceptance at hig-
her ambient temperature see derating
curves
Dimensions
44 mm
44.0
35.8
36.0
27.0
18.8
2.3
2.3
36.0
E: solder terminals = 37.6 mm
E: quick-connect terminals = 41.0 mm
3.4
6.1x90˚
ø 3.5
E
max. R2.5
27.4
Connectors