10700456 Datasheet, PDF (1/4 Pages) Schurter Inc. – TOUCH SCREEN

Analog 4-wire PET-On-Glass Touch Screen Specification
1. Mechanical Dimensions and Construction
1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.
1.2 Construction :
Item Description
ITO PET
1 (Top layer)
2 ^{ITO Patterned Glass (Bottom layer)}
3 Tail Base
4 Tail Coverlay
5 Conductor
6 Top layer circuit
7 Bottom layer circuit
8 Layer to layer contacted
9 Dot spacer
10 Isolation Layer
11 Stiffener
12 Glue
13 Tape
Material
0.188mm ITO PET
Film
1.10mm ITO Glass
Kapton
Kapton
Copper
Silver ink
Silver ink
Silver ink
UV Cure ink
Isolation Adhesive
Polyester
UV Glue
PET Film
Remarks
Antiglare coating
Surface hardness: 3H
Resistance:300~600Ω/□
Resistance:300~600Ω/□
Separated Tail
Touch screen side view:
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2006 Datum Name
Bearb.
Gepr.
Vert.
21.08.
21.08.
Maurer
Maurer
TOUCH SCREEN
5,72“, 4 Wire
AMT-09532-5-A1
EDV-Datasheet
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
don’t change manually
Manufactured by Apex Material Technology Corp.
D 79346 Endingen
H 1070,0456
page 1 of 4 Index: -