10700049 Datasheet, PDF (1/2 Pages) Schurter Inc. – Touch Controller Chip Combo, RS232 / USB

PenMount 6000 Touch Screen Controller IC
PenMount 6000 touch screen controller is the best performance touch screen controller, it is designed to
have PnP features to meet the new systems trend. It is also a very good performance of RS-232 and
USB interface on the touch screen. PenMount 6000 has been designed for
those who may like and all-in-one solution with 10-bit A/D converter built-in to
make the total printed circuit board denser, circuit diagram also designed for
12-bit ADC for optional.
Electrical Specifications
Touch Screen:
Package:
Communications:
Features:
Sample rate:
Calibration data:
Resistance range:
Resolution:
Operating Voltage:
Operating Temperature:
Storage Temperature:
For 4-, 5-, 8-wire analog resistive type
28pin - QFN
RS232 19200 / 9600 baud rate; USB full speed, 12MHz
High-speed pipelined 8051-compatible microcontroller core (up to 25MIPS)
True 10-bit, 17-channel single-ended/differential ADC, analog multiplexer
On-chip Voltage Reference and Temperature Sensor
On-chip Voltage Comparators
On-chip Power-On Reset, VDD Monitor, and Missing Clock Detector
On-chip FLASH memory
USB, UART, SPI interfaces implemented in hardware
Programmable Counter / Timer Array / compare modules / Watchdog Timer
On-chip Power-On Reset, VDD Monitor, and Missing Clock Detector
Maximal 200 points / second
Calibration data saved into Chip and also into register file
50 – 1300 Ohm
2048 x 2048 (up to 4096 x 4096 optional)
+5V DC ± 5%
-40^o C to +85^o C
-65^o C to +150^o C
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2007 Datum Name
Bearb. 05.04. Maurer
Touch Controller Chip
Gepr. 05.04. Maurer
Combo, RS232 / USB
Vert.
4-, 5-, 8-wire
EDV-Datasheet
SPEZIFICATIONS
PenMount DMC6000
don’t change manually Manufactured by Apex Material Technology Corp.
D 79346 Endingen
H 1070,0049
page 1 of 2 Index: