1070004701 Datasheet, PDF (1/3 Pages) Schurter Inc. – Touch Controller Board USB

PenMount 6300 USB Interface Control Board
PenMount 6300 USB control board is a touch screen control board designed for USB interface
and specific for 4, 5, 8-wire touch screens. It is designed with USB interface features with mul-
tiple devices supporting function. PenMount 6300 control board using PenMount 6000 controller
that has been designed for those who may like and all-in-one solution with 10-bit A/D converter
built-in to make the total printed circuit board denser, circuit diagram also designed for 12-bit
ADC for optional. There are two connectors on this board, one connector is for 4, 5, 8-wire
touch screen cable (optional), and another is for 4-pin USB A type cable.
Electrical Specifications
Touch Screen:
Communications:
Touch Screen Controller:
Resolution:
Size:
Portrait:
Diagnostic:
Calibration data:
Operating Voltage
Storage Temperature Range
Operating Temperature
For 4-, 5-, 8-wire analog resistive type
USB full speed, 12MHz
PenMount 6000 microcontroller
2048x2048 (up to 4096 x 4096)
60x26 mm, two 3mm Ø screw holes
Support 90° 180° and 270° screen rotation
LED on board
data saved into Chip and also into register file
+5V DC
-40°C ~ 85°C
-20°C ~ 70°C
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2007 Datum Name
Bearb. 05.04. Maurer
Gepr. 05.04. Maurer
Touch Controller Board
USB
Vert.
4-, 5-, 8-wire
EDV-Datasheet
SPEZIFICATIONS
PenMount 6300 USB
don’t change manually Manufactured by Apex Material Technology Corp.
D 79346 Endingen
H 1070,0047.01-.04
page 1 of 3 Index: