1070004501 Datasheet, PDF (1/2 Pages) Schurter Inc. – Touch Controller Board USB

PenMount 5126 Touch Controller Board
PenMount 5126 USB control board is a touch screen control board designed for USB interface and specific for 4-
wire & 8-wire touch screens. It is designed with USB interface features with multiple devices supporting function,
it is able to support up to 15 USB devices through PenMount 5126 board. With the small footprint mechanical
size, the controller consists of two controller ICs, DMC5100 and DMC5600.DMC5100 is an 8-bit microcontroller
while DMC5600 is a Universal Serial Bus microcontroller. There are two connectors on this board, one connector
is 9-pin connector for touch screen , and the other is 4-pin USB A type cable.
Electrical Specifications
Touch Screen:
For 4- & 8-wire analog resistive type
Communications:
USB
Touch Controller :
DMC5100
USB controller:
DMC5600
Resolution:
2048 x 2048
Power Consumption:
Size:
29mA+ i where (i = v/touch screen sheet R)
60 (L) x 26 (W) x 6.3 (H) mm
Storage Temperature Range
-40°C - +85°C
Operating Temperature
0°C –70°C
Diagnostic:
LED on board
Electro Static Discharge Protection Air Discharge 20KV / Contact Discharge 15KV
Multi-devices:
Supporting up to 15 USB devices
a ^{2002057 24.10.2005 Maurer}
Zu Änd. Datum Name
Changes that contribute to technical improvement are subject to alternations
2005 Datum Name
Bearb.
Gepr.
Vert.
21.09.
21.09.
Maurer
Maurer
Touch Controller Board
USB
4, 8-wire
EDV-Datasheet
SPEZIFICATIONS
PenMount 5126
don’t change manually Manufactured by Apex Material Technology Corp.
D 79346 Endingen
H 1070,0045.01-.03
Blatt 1 von 2 Index: a