1062 Datasheet, PDF (1/5 Pages) Schurter Inc. – IEC Appliance Inlet C14 or C18 with Fuseholder 1-pole

Power entry modules without line filter
IEC Appliance Inlet C14 or C18 with Fuseholder 1-pole
www.schurter.com/pg05
1062
1062: Design 1 + 2
equipment class 1
C14
1062: design 6 + 7
equipment class 1
70° C
Description
- Panel Mount:
Screw-on from front side, Appliance Inlet, protection class I or II, Fuse-
holder for fuse-links 5 x 20 mm
- Solder terminals or quick connect terminals
Approvals
- UL License Number: E88880
- CSA License Number: 1084381
Characteristics
- The fuse drawer "Fingergrip" can be removed by hand
The fuseholder is accessible from the equipment front
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Material: Housing
10 A / 250 VAC; 50 Hz
10 A / 250 VAC; 60 Hz
> 3 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 20 acc. to IEC 60529
Suitable for appliances with protection
class 1 or 2 acc. to IEC 61140
Solder terminals or quick connect ter-
minals
UL 94V-0
Appliance Inlet
Fuseholder
Power Acceptance @ Ta >
23°C
C14 acc. to IEC/EN 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1 or 2
1 or 2 pole, acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Admissible power acceptance at hig-
her ambient temperature see derating
curves
Dimensions
50
ø ^3.2
44 mm
19.7
R ^0.5
+0.2
33.2 -0
40
16.5
R
5
0.5
R _<2
40
3
33
28
lenght of the terminal please find at the order code configuration table
Connectors