00318002 Datasheet, PDF (1/2 Pages) Schurter Inc. – Fuseholder Open Design, 6.3 x 32 mm, THT

Fuseholder Blocks & Clips
Fuseholder Open Design, 6.3 x 32 mm, THT
OG (Holder) 6.3x32
www.schurter.com/pg02b
250 VAC · 2.5 W / 10 A16 A (UL)
Description
- Through hole mounting
Approvals
- UL File Number: E39328
Technical Data
Fuse-Link
Mounting
Mounting
Terminal
Rated Voltage
Rated Current
Rated Power Acceptance IEC
Degree of Protection
Protection Class
Admissible Ambient Air Temp.
Climatic Category
Material: Terminals
Unit Weight (Socket/Cap)
Storage Conditions
Product Marking
6.3 x 32 mm
PCB
Screw or Rivet
Solder THT
250 VAC
16 A (UL)
2.5 W / 10 A @ Ta 23 °C
Admissible power acceptance at hig-
her ambient temperature see derating
curves
IP 00
Suitable for appliances with protection
class 1 or 2 acc. to IEC 61140
-40 °C to 85 °C
40/085/21 acc. to IEC 60068-1
Tin-Plated Copper Alloy
7.23 g
0 °C to 60 °C, max. 70% r.h.
Voltage, Current, Approvals
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check,
Accessories, Product Change Notification (PCN)
Soldering Methods
Solderability
Resistance to Soldering Heat
Contact Resistance
Dielectric Strength
Impulse Withstand Voltage
Insulation Resistance
Overvoltage Category
Pollution Degree
Wave
235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
< 5 mΩ at 20 mV
> 3 kV between L-N
(50 Hz; 1 min)
> 4 kV between L-N
> 10 MΩ between L-N
(500 VDC; 1 min)
I - III acc. to IEC 60664-1
1 - 3 acc. to IEC 60664-1
Abmessungen
41 mm
41
ø 6.3
max. 15
+0.1
1.3 0
ø 3.2
+0.6
37.5 0
0.5 1.1
Drilling diagram
37.5
+0.6
0
Fuses