0031.7601 Datasheet, PDF (1/1 Pages) Schurter Inc. – Fuseholder Open Design, Holder for MSx 250, THT

Fuseholder Blocks & Clips
Fuseholder Open Design, Holder for MSx 250, THT
FMS (250V)
www.schurter.com/pg02b
250 VAC/DC · 6.3 A (UL/CSA)
Description
- Through hole mounting
Standards
- UL 4248-1 / UL 512
- CSA 4248-1 / no. 39
Approvals
- UL File Number: E39328
Technical Data
Fuse-Link
Mounting
Terminal
Rated Voltage
Rated Current
Degree of Protection
Admissible Ambient Air Temp.
Climatic Category
Material: Socket
Material: Terminals
Unit Weight (Socket/Cap)
Storage Conditions
Product Marking
Microfuse 250 V
PCB
Solder THT
250 VAC/DC
6.3 A (UL/CSA)
IP 30
-40 °C to 85 °C
40/085/21 acc. to IEC 60068-1
Thermoplastic, UL 94V-0
Tin-Plated Copper Alloy
0.37 g
0 °C to 60 °C, max. 70% r.h.
,  
Dimensions
7.6 mm
4.4 3.2
3
4.3
R 0.75
45˚
Variant 0031.7601
Variants
Holder
Order Number
l
0031.7601
Packaging Unit
Plastic box (100 pcs.)
References
Weblinks
pdf, html, General Product Information, Approvals, RoHS, CHINA-RoHS,
e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check
Soldering Methods
Solderability
Resistance to Soldering Heat
Contact Resistance
Dielectric Strength
Impulse Withstand Voltage
Insulation Resistance
Overvoltage Category
Pollution Degree
Wave
235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
< 7 mΩ at 20 mV
> 3 kV between L-N
(50 Hz; 1 min)
> 4 kV between L-N
> 10 MΩ between L-N
(500 VDC; 1 min)
I - III acc. to IEC 60664-1
1 - 3 acc. to IEC 60664-1
1
Drilling diagram
The specifications, descriptions and illustrations indicated in this document are b_Fa_use_sd_eo_sn
current information. All content is subject to modifications and amendments.