English
Language : 

LC87F5G32A Datasheet, PDF (9/23 Pages) Sanyo Semicon Device – FROM 32K byte, RAM 1024 byte on-chip 8-bit 1-chip Microcontroller
LC87F5G32A
Continued from preceding page.
Pin Name
I/O
Description
Port 3
P30 to P36
Port 7
P70 to P73
I/O
• 7-bit I/O port
• I/O specifiable in 1-bit units
• Pull-up resistors can be turned on and off in 1-bit units
• Shared pins
On-chip debugger pins: DBGP0 to DBGP2 (P30 to P32)
I/O
• 4-bit I/O port
• I/O specifiable in 1-bit units
• Pull-up resistors can be turned on and off in 1-bit units
• Shared pins
AD converter input port : AN8 (P70), AN9 (P71)
P70: INT0 input/HOLD reset input/timer 0L capture input/watchdog timer output
P71: INT1 input/HOLD reset input/timer 0H capture input
P72: INT2 input/HOLD reset input/timer 0 event input/timer 0L capture input
P73: INT3 input (with noise filter)/timer 0 event input/timer 0H capture input
Interrupt acknowledge type
Rising
Falling
Rising &
Falling
H level
INT0
enable
enable
disable
enable
INT1
enable
enable
disable
enable
INT2
enable
enable
enable
disable
INT3
enable
enable
enable
disable
L level
enable
enable
disable
disable
PWM0, PWM1
RES
XT1
XT2
CF1
CF2
I/O
Input
Input
I/O
Input
Output
• PWM0 and PWM1 output ports
• General-purpose I/O available
Reset pin
• 32.768kHz crystal oscillator input pin
• Shared pins
General-purpose input port
AD converter input port: AN10
Must be connected to VDD1 if not to be used
• 32.768kHz crystal oscillator output pin
• Shared pins
General-purpose I/O port
AD converter input port: AN11
Must be set for oscillation and kept open if not to be used
Ceramic resonator input pin
Ceramic resonator output pin
Option
Yes
No
No
No
No
No
No
No
No.8298-9/23