ENA1929-D Datasheet, PDF (9/14 Pages) Sanyo Semicon Device – Forward/Reverse Motor Driver

STK681-352-E
Technical Information
1. Configuration of each pins <Configuration of the IN1, IN2, and ENABLE input pins>
Input pins: 16, 17, 18 pin
5V
10kΩ
100kΩ
VSS
The input pins of this driver all use Schmitt input. Typical specifications at Tc = 25°C are given below. Hysteresis
voltage is 0.3V (VIHa-VILa).
When rising
1.8V typ
Input voltage
VIHa
When falling
1.5V typ
VILa
Input voltage specifications are as follows.
VIH = 2.5V min
VIL = 0.8V max
<Configuration of the FAULT input pin>
Output pin
5V
Pin 13
VSS
No.A1929-9/14