LC863232 Datasheet, PDF (8/20 Pages) Sanyo Semicon Device – 8-Bit Single Chip Microcontroller

LC863232/28/24/20/16A
Terminal I/O
Function Description
Port 7
•4-bit input/output port
P70
I/O Input or output can be specified for each bit
P71 - P73
•Other function
P70 INT0 input/HOLD release input/
Nch-Tr. output for wachdog timer
P71 INT1 input/HOLD release input
P72 INT2 input/Timer 0 event input
P73 INT3 input (noise rejection filter
connected)/
Timer 0 event input
Interrupt receiver format, vector addresses
rising falling rising/ H level L level vector
falling
INT0 enable enable disable enable enable 03H
INT1 enable enable disable enable enable 0BH
INT2 enable enable enable disable disable 13H
INT3 enable enable enable disable disable 1BH
Port 8
•4-bit input/output port
P84 - P87 I/O Input or output can be specified for each bit
•Other function
AD converter input port (4 lines)
NC
-
Unused terminal
Leave open
Option
• ^{Output form and existance of pull-up resistor for all ports can be specified for each bit.}
• ^{Programmable pull-up resistor is always connected regardless of port option, CMOS or N-ch open drain output in port 1.}
• ^{Port status in reset}
Terminal
Port 0
Port 1
I/O
Pull-up resistor status at selecting pull-up option
I
Pull-up resistor OFF, ON after reset release
I
Programmable pull-up resistor OFF
No.6693-8/20