LC72121 Datasheet, PDF (5/22 Pages) Sanyo Semicon Device – PLL Frequency Synthesizers for Electronic Tuning

LC72121, 72121M, 72121V
Continued from preceding page.
Parameter
Output low-level voltage
Input high-level current
Input low-level current
Output off leakage current
High-level 3-state off leakage current
Low-level 3-state off leakage current
Input capacitance
Supply current
Symbol
Conditions
V_OL1
V_OL2
V_OL3
V_OL4
I_IH1
I_IH2
I_IH3
I_IH4
I_IH5
I_IH6
I_IL1
I_IL2
I_IL3
I_IL4
I_IL5
I_IL6
I_OFF1
I_OFF2
I_OFFH
I_OFFL
C_IN
I_DD1
I_DD2
I_DD3
PD: I_O = 1 mA
BO1 to BO4, IO1, IO2: I_O = 1 mA
BO1 to BO4, IO1, IO2: I_O = 8 mA
DO: I_O = 5 mA
AOUT: I_O = 1 mA, AIN = 1.3 V
CE, DI, CL: V_I = 6.5 V
IO1, IO2: V_I = 13 V
XIN: V_I = V_DD
FMIN, AMIN: V_I = V_DD
IFIN: V_I = V_DD
AIN: V_I = 6.5 V
CE, DI, CL: V_I = 0 V
IO1, IO2: V_I = 0 V
XIN: V_I = 0 V
FMIN, AMIN: V_I = 0 V
IFIN: V_I = 0 V
AIN: V_I = 0 V
BO1 to BO4, IO1, IO2, AOUT: V_O = 13 V
DO: V_O = 6.5 V
PD: V_O = V_DD
PD: V_O = 0 V
FMIN
V_DD: Xtal = 7.2 MHz, f_IN2 = 130 MHz,
V_IN2 = 20 mVrms
V_DD: PLL block stopped (PLL inhibit mode)
Crystal oscillator operating
(crystal frequency: 7.2 MHz)
V_DD: PLL block stopped, crystal oscillator
stopped
Ratings
min
typ
1.3
2.5
5.0
1.3
2.5
5.0
0.01
0.01
6
2.5
Unit
max
1.0
V
0.2
V
1.6
V
1.0
V
0.5
V
5.0
µA
5.0
µA
8
µA
15
µA
30
µA
200
nA
5.0
µA
5.0
µA
8
µA
15
µA
30
µA
200
nA
5.0
µA
5.0
µA
200
nA
200
nA
pF
6 mA
0.3
mA
10
µA
Pin Descriptions
Pin
name
Pin No.
LC72121
LC72121M
LC72121V
Type
Function
Equivalent circuit
XIN
1
XOUT
22
1
Xtal
24
• Crystal oscillator element connections (4.5 or 7.2 MHz)
FMIN
16
AMIN
15
• FMIN is selected when DVS in the serial data is set to 1.
• Input frequency: 10 to 160 MHz
Local
• The signal is passed through an internal divide-by-two prescaler and
17
oscillator
then input to the swallow counter.
signal input _{• The divisor can be set to a value in the range 272 to 65535. Since}
the internal divide-by-two prescaler is used, the actual divisor will be
twice the set value.
• AMIN is selected when DVS in the serial data is set to 0.
• When SNS in the serial data is set to 1:
• Input frequency: 2 to 40 MHz
• The signal is input to the swallow counter directly.
Local
• The divisor can be set to a value in the range 272 to 65535. The
16
oscillator
set value becomes the actual divisor.
signal input _{• When SNS in the serial data is set to 0:}
• Input frequency: 0.5 to 10 MHz
• The signal is input to a 12-bit programmable divider directly.
• The divisor can be set to a value in the range 4 to 4095. The set
value becomes the actual divisor.
Continued on next page.
No. 5815-5/22