LC89080 Datasheet, PDF (4/8 Pages) Sanyo Semicon Device – Video Signal 3-Channel 8-Bit D/A Converter

LC89080, 89080Q
Pin Assignment LC89080Q (QFP48A)
Pin No.
1 to 3
4
5
6
7 to 12
13
14
15 to 18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46 to 48
Symbol
DA5 to 7
DA8
DB1
NC
DB2 to DB7
DB8
DC1
DC2 to DC5
DV_DD
DC6
DC7
DC8
CLK
NC
DV_DD
DGND
ICOB
ICO
AV_DD
AV_DD
IBOB
IBO
AGND
IAOB
IAO
AV_DD
COMP
NC
I_REF
V_REFIN
V_REFOUT
DGND
DV_DD
DV_DD
DA1
DA2 to DA4
Description
Channel A digital input
Channel A digital input (LSB)
Channel B digital input (MSB)
Unused (no connection)
Channel B digital input
Channel B digital input (LSB)
Channel C digital input (MSB)
Channel C digital input
Digital system power supply (+5 V)
Channel C digital input
Channel C digital input
Channel C digital input (LSB)
Clock input
Unused (no connection)
Digital system power supply (+5 V)
Digital system ground (0 V)
Channel C negative output. Connect to A.GND through an output resistor R_O (usually 75 Ω).
Channel C positive output. Connect to A.GND through an output resistor R_O (usually 75 Ω).
Analog system power supply (+5 V)
Analog system power supply (+5 V)
Channel B negative output. Connect to A.GND through an output resistor R_O (usually 75 Ω).
Channel B positive output. Connect to A.GND through an output resistor R_O (usually 75 Ω).
Analog system ground (0 V)
Channel A negative output. Connect to A.GND through an output resistor R_O (usually 75 Ω).
Channel A positive output. Connect to A.GND through an output resistor R_O (usually 75 Ω).
Analog system power supply (+5 V)
Phase compensation capacitor. Connect a 1 µF capacitor between this pin and ground.
Unused (no connection)
Reference current output. Connect a resistor that is 4 times the output resistance R_O to this pin.
Reference voltage input. This input pin sets the analog output dynamic range.
Reference voltage output. The output voltage is set to 0.2 times V_DD by a resistor divider.
When V_DD is 5.0 V, a 1.0 V reference voltage can be acquired from pin 40.
Digital system ground (0 V)
Digital system power supply (+5 V)
Digital system power supply (+5 V)
Channel A digital input (MSB)
Channel A digital input
No. 4030-4/8