STK672-730A-E Datasheet, PDF (3/19 Pages) Sanyo Semicon Device – Thick-Film Hybrid IC 2-phase Stepping Motor Driver

Package Dimensions
unit:mm (typ)
29.2
25.6
(20.47)
STK672-730A-E
4.5
2.0
(R1.7)
1
19
1.0
0.52
(5.6)
18 1.0=18.0
4.2
0.4
8.2
(20.4)
Derating curve of motor current, IOH, vs. STK672-730A-E Operating substrate temperature, Tc
IOH - Tc
3.0
200Hz 2 phase excitation
2.5
Hold mode
2.0
1.5
1.0
0.5
0
0 10 20 30 40 50 60 70 80 90 100 110
Operating Substrate Temperature, Tc- °C _ITF02548
Notes
• The current range given above represents conditions when output voltage is not in the avalanche state.
• If the output voltage is in the avalanche state, see the allowable avalanche energy for STK672-7** series hybrid ICs given
in a separate document.
• The operating substrate temperature, Tc, given above is measured while the motor is operating.
Because Tc varies depending on the ambient temperature, Ta, the value of IOH, and the continuous or intermittent
operation of IOH, always verify this value using an actual set.
No. A1221-3/19