LC89902V Datasheet, PDF (3/5 Pages) Sanyo Semicon Device – CMOS Driver for VGA-Format Image Sensors

LC89902V
Pin Functions
Pin No. Pin name
Function
1
GND Ground
2
V_EE1 Negative power supply used to set the low output level
3
NC –
4
OUT1 Channel 1 driver output
5
OUT2 Channel 2 driver output
6
OUT3 Channel 3 driver output
7
OUT4 Channel 4 driver output
8
OUT5 Channel 5 driver output
9
OUT6 Channel 6 driver output
10 OUT TG1 Transfer gate 1 driver output
11 OUT YG2 Transfer gate 2 driver output
12
V_EE2 Negative power supply used to set the low output level
13
V_CC3 Positive power supply used to set the high output level
14
TG2 Transfer gate 2 driver input
15
TG1 Transfer gate 1 driver input
16
CH6 Channel 6 driver input
17
CH5 Channel 5 driver input
18
CH4 Channel 4 driver input
19
CH3 Channel 3 driver input
20
CH2 Channel 2 driver input
21
CH1 Channel 1 driver input
22
GND Ground
23
V_CC2 Positive power supply used to set the high output level
24
V_CC1 Positive power supply used to set the high output level
Electrical Characteristics at Ta = 25°C, V_CC1, V_CC2, and V_CC3 = 5.0 V, V_EE1 and V_EE2 = –10.0 V
Parameter
Symbol
Conditions
Ratings
Unit
min
typ
max
Input high-level current
Supply current
Output voltage
Output voltage under actual operating conditions
Output current under actual operating conditions
I_IH
I_IL
I_CCH+
I_CCH–
I_CCL+
I_CCL–
V_OH
V_OL
V_OH2
V_OL2
I_CC2⁺
I_CC2^–
All input pins, V_IN = 5.0 V
All input pins, V_IN = 0 V
V_CC1, V_CC2, and V_CC3, all input pins, V_IN = 5.0 V
V_EE1 and V_EE2, all input pins, V_IN = 5.0 V
V_CC1, V_CC2, and V_CC3, all input pins, V_IN = 0 V
V_EE1 and V_EE2, all input pins, V_IN = 0 V
All input pins, V_IN = 0 V
All input pins, V_IN = 5.0 V
Load = LC99152, input = LC99055 *
Load = LC99152, input = LC99055 *
Load = LC99152, input = LC99055 *
Load = LC99152, input = LC99055 *
10
µA
5
nA
1
µA
–10
µA
7
µA
–2
µA
5.0
V
–10
V
5.0
V
–10
V
1.62
mA
1.61
mA
Note: * Values for when the LC99055 timing IC provides the input pulses and the LC99152 image sensor is driven. These values are provided for reference
purposes only.
No. 5741-3/5