LC895299W Datasheet, PDF (3/12 Pages) Sanyo Semicon Device – 48 x Speed ATAPI (IDE) CD-ROM Decoder with On-Chip Digital Servo System

LC895299W, 895299L
DC Characteristics at Ta = 0 to +70°C, V_SS = 0 V, V_DD = 4.5 to 5.5 V
Parameter
Input high-level voltage
Input low-level voltage
Input high-level voltage
Input low-level voltage
Input high-level voltage
Input low-level voltage
Input high-level voltage
Input low-level voltage
Input high-level voltage
Input low-level voltage
Input high-level voltage
Input low-level voltage
Input high-level voltage
Input low-level voltage
Analog input voltage
Output high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level voltage
Output high-level voltage
Output low-level voltage
Output low-level voltage
Output low-level voltage
Output low-level voltage
Analog output voltage
Input leakage current
Output leakage current
Pull-up resistance
Pull-up resistance
Pull-up resistance
Pull-down resistance
Pull-down resistance
Symbol
V_IH
V_IL
V_IH
V_IL
V_IH
V_IL
V_IH
V_IL
V_IH
V_IL
V_IH
V_IL
V_IH
V_IL
V_ANI
V_OH
V_OL
V_OH
V_OL
V_OH
V_OL
V_OH
V_OL
V_OL
V_OL
V_OL
V_ANO
I_IL
I_OZ
R_UP
R_UP
R_UP
R_DN
R_DN
Conditions
TTL level inputs
Applicable pins *
1
min
2.2
2.2
TTL level inputs with pull-up resistors
7
2.2
TTL level inputs with pull-down resistors
2
TTL level inputs
Schmitt inputs
TTL level inputs
Schmitt inputs with pull-up resistors
CMOS level inputs
Schmitt inputs
CMOS level inputs with pull-up resistors
3, 9
19, 20
4
5
2.4
2.4
0.8 V_DD
0.7 V_DD
I_OH = –2 mA
I_OL = 2 mA
I_OH = –8 mA
I_OL = 8 mA
I_OH = –4 mA
I_OL = 24 mA
I_OH = –4 mA
I_OL = 4 mA
I_OL = 24 mA
I_OL = 1 mA
I_OL = 8 mA
V_I = V_SS, V_DD
During high-impedance output
18
6, 17
1/4 V_DD
V_DD – 2.1
7, 8, 14
V_DD – 2.1
9, 12, 10, 20 ^{VDD – 2.1}
16
V_DD – 2.1
11, 21
13
15
22
1, 3, 4, 9
9, 11, 13,
14, 16, 17
5
7, 15
19, 20, 21
2
10
1/4 V_DD
–10
–10
50
20
7
50
7
Ratings
Unit
typ
max
V
0.8 V
V
0.8 V
V
0.8 V
V
0.8 V
V
0.8 V
V
0.2 V_DD
V
V
0.3 V_DD
V
3/4 V_DD
V
V
0.4 V
V
0.4 V
V
0.4 V
V
0.4 V
0.4 V
0.4 V
0.4 V
3/4 V_DD
V
+10 µA
+10 µA
100
200 kΩ
40
80 kΩ
10
13 kΩ
100
200 kΩ
10
13 kΩ
Note: * The applicable pin column entries refer to the following sets.
INPUT
1 : ATPINSEL, SUA0 to SUA7
2 : TEST0 to TEST2
3 : DA0 to DA2, ZCS1FX, ZCS3FX, ZDIOR, ZDIOW, ZHRST, ZCS, ZRD, ZWR
4 : ZRESET, ZDSPRST
5 : FG
18 : AD0, AD1, PH, BH, RREC, FE, TE, VREF, CSS, AD2
19 : ZDMACK, CSEL
OUTPUT
6 : FSEQ
8 : HFLO, FSX, EFLG, C2F, WRQ, DIR, PCK, EFMOUT
13 : HINTRQ
11 : ZIOCS16
10 : DMARQ
13 : PDS1 to PDS3
14 : DOUT
15 : ZSWAIT, ZINT0, ZINT1
21 : IORDY
16 : DSLB, EQS, OUTPORT0 to OUTPORT2, MCK
17 : RHLD, TSH, BHH, GHS, LDON
22 : PHC, BHC, FBAL, TBAL, SGC, TOFST, TDO, FDO, SLDO, SPDO
INOUT
7 : D0 to D7, TRV, TRV2
9 : DD0 to DD15
20 : ZDASP, ZPDIAG
Note: XTAL, XTALCK
The above pins are not included in the DC Characteristics.
No. 6249-3/12