LC65F1306A Datasheet, PDF (3/22 Pages) Sanyo Semicon Device – 4-Bit Single-Chip CMOS Microcontroller for Small-Scale Control Applications

Function Table
LC65F1306A
Parameter
Memory
ROM
Instructions
On-chip
functions
I/O ports
RAM
Instruction set
Table reference
Interrupt
Timer
Stack level
Standby function
Port number
Serial port
I/O
voltage
capacity
Output current
I/O circuit type
Characteristics
Oscillator
Output level at
reset
Square wave output
Minimum cycle
time
Operating
temperature
Supply voltage
Supply current
Oscillator
Other items
Divider circuit
option
Package
Watchdog timer
OTP
LC651306A/04A/02A/01A
6144 × 8 bits (1306A)
4096 × 8 bits (1304A)
2048 × 8 bits (1302A)
1024 × 8 bits (1301A)
256 × 4 bits
(1306A/04A/02A/01A)
81
Supported
1 external, 1 internal
4-bit variable prescaler + 8-bit
timers
8
Standby mode by the HALT
instruction supported
18 I/O port pins
Input and output in 4 or 8 bit
units
LC65F1306A
6144 × 8 bits
256 × 4 bits
81
Supported
1 external, 1 internal
4-bit variable prescaler + 8-bit
timers
8
Standby mode by the HALT
instruction supported
22 I/O port pins
Input and output in 4 or 8 bit
units
15 V max.
15 V max.
10 mA typ. 20 mA max.
10 mA typ. 20 mA max.
Open drain (N-channel) or
Open drain (N-channel)
pull-up resistor output option
can be specified in 1- bit unit.
High or low level output can be selected in port unit (ports C and D
only)
Supported
Supported
0.92 µs (VDD ≥ 2.5 V)
0.92 µs (VDD ≥ 3.0 V)
-40°C to +85°C
2.5 to 6 V
1.5 mA typ.
RC (800 kHz typ.)
Ceramic (400k, 800k,1MHz,
4MHz)
1/1, 1/3, 1/4
0°C to +85°C (when writing)
-20°C to +85°C (when reading)
3.0 to 5.5 V
3 mA typ.
RC (800 kHz typ.)
Ceramic (400k, 800k,1MHz,
4MHz)
1/1, 1/3, 1/4
DIP24S MFP24S SSOP24
Supported
Only DIP24S MFP24S
DIP24S MFP24S
Supported
-
Note: The above oscillator and oscillator circuit constants are tentative. They will be announced as the recommended circuits
for these microcontrollers are determined. Please confirm the progress of these developments periodically.
No.6829-3/22