|
LC877917A Datasheet, PDF (23/29 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller | |||
|
◁ |
LC877917A
Continued from preceding page.
Parameter
Current
consumption
during HALT
Symbol
IDDHALT(1)
Pin
Conditions
VDD1=
VDD2=V2
HALT mode
⢠FmCF=4MHz Ceramic resonator
oscillation
VDD[V]
min
Specification
typ
max
unit
mode
⢠FsXâtal=32.768kHz crystal oscillation
(Note 8-1)
(Normal operation)
2.4 to 3.6
510
1370
⢠System clock: CF 4MHz oscillation
⢠Internal RC oscillation stopped
⢠Divider: 1/1
⢠Normal power mode
IDDHALT(2)
HALT mode
⢠FmCF=0Hz (No oscillation)
⢠FsXâtal=32.768kHz crystal oscillation
(Normal operation)
2.4 to 3.6
52
185
⢠System clock: Fast RC oscillation
⢠Divider: 1/1
⢠Normal power mode
IDDHALT(3)
HALT mode
⢠FmCF=0Hz (No oscillation)
⢠FsXâtal=32.768kHz crystal oscillation
(Normal operation)
2.4 to 3.6
24
110
⢠System clock: Fast RC oscillation
⢠Divider: 1/1
⢠Power save mode
IDDHALT(4)
HALT mode
⢠FmCF=0Hz (No oscillation)
⢠FsXâtal=32.768kHz crystal oscillation
(Normal operation)
2.4 to 3.6
15
85
⢠System clock: Slow RC oscillation
μA
⢠Divider: 1/1
⢠Normal power mode
IDDHALT(5)
HALT mode
⢠FmCF=0Hz (No oscillation)
⢠FsXâtal=32.768kHz crystal oscillation
(Normal operation)
2.4 to 3.6
12
76
⢠System clock: Slow RC oscillation
⢠Divider: 1/1
⢠Power save mode
IDDHALT(6)
HALT mode
⢠FmCF=0Hz (No oscillation)
⢠FsXâtal=32.768kHz crystal oscillation
(Normal operation)
⢠Internal RC oscillation stopped.
2.4 to 3.6
350
995
⢠System clock: VMRC oscillation
(4MHz)
⢠Divider: 1/1
⢠Normal power mode
IDDHALT(7)
HALT mode
⢠FmCF=0Hz (No oscillation)
⢠FsXâtal=32.768kHz crystal oscillation
(Normal operation)
⢠System clock: 32.768kHz
2.4 to 3.6
8.1
61
⢠Internal RC oscillation stopped.
⢠Divider: 1/1
⢠Normall XT Amp mode
⢠Normal power mode
Note 8-1: The currents through the output transistors and the pull-up MOS transistors are ignored.
Continued on next page.
No.A1840-23/29
|
▷ |