LA76810A Datasheet, PDF (23/40 Pages) Sanyo Semicon Device – For PAL/NTSC Color Television Sets VIF/SIF/Y/Deflection 1chip IC

LA76810A
Deflection Block Test Conditions
Input signal
Horizontal free-running
frequency
Symbol
fH
Test point
27
Input signal
Y IN:
No signal
Horizontal pull-in range
fH PULL
Horizontal output
pulse length
Hduty
Horizontal output pulse
saturation voltage
V Hsat
Vertical free-running
period 50 (PAL)
Vertical free-running
period 60 (NTSC)
VFR50
VFR60
YIN:
42
Horizontal/
vertical sync
signal
PAL
Y IN:
27
Horizontal/
vertical sync
signal
PAL
Y IN:
27
Horizontal/
vertical sync
signal
PAL
Y IN:
23
No signal
Test me hod
Connect a frequency counter to the output of pin
27 (H out) and measure the horizontal
free-running frequency.
Using an oscilloscope, monitor the horizontal
sync signal which is input to the Y IN (pin 42) and
the pin 27 output (H out) and vary he horizontal
signal frequency to measure the pull-in range.
Measure the voltage for the pin 27 horizontal
output pulse’s low-level period.
Measure the voltage for the pin 27 horizontal
output pulse’s low-level period.
Measure the vertical output period T at pin 18
T×15.625kHz (PAL)
T×15.734kHz (NTSC)
Vertical output
2.5V
Bus bit/input signal
CDMODE: 001
(PAL)
CDMODE: 002
(NTSC)
T
Horizontal output pulse
HPHCEN
(PAL)
(NTSC)
Y IN:
Measure the delay time from to the rise of the pin
27
Horizontal/
27 horizontal output pulse to the fall of the Y IN
vertical sync horizontal sync signal.
signal
42
PAL
HPHCEN
NTSC
20IRE
Horizontal position
adjustment range
HPHrange
Horizontal output
2.5V
Y IN:
With H PHASE: 0 and 31, measure the delay time H PHASE: 00000
27
Horizontal/
from the rise of the pin 27 horizontal output pulse H PHASE: 11111
vertical sync to the fall of the Y IN horizontal sync signal and
signal
42
PAL
calculate the difference from H PHCEN.
Measuring
HPHCEN
20IRE
Horizontal output
2.5V
Continued on next page
NoA0252-23/40