LC87F5ND0C Datasheet, PDF (20/25 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller

LC87F5ND0C
Continued from preceding page.
Parameter
HALT mode
consumption
current
(Note 7-1)
Symbol
IDDHALT(4)
IDDHALT(5)
Pins/Remarks
Conditions
VDD1
=VDD2
=VDD3
=VDD4
• HALT mode
• FmCF=4MHz ceramic oscillation mode
• FmX’tal=32.768kHz by crystal oscillation
mode
• System clock set to 4MHz side
• Internal RC oscillation stopped
• frequency variable RC oscillation stopped
• 1/1 frequency division ratio.
VDD[V]
min
4.5 to 5.5
2.2 to 4.5
Specification
typ
max unit
1.1
2.6
0.57
1.5
IDDHALT(6)
IDDHALT(7)
IDDHALT(8)
IDDHALT(9)
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX’tal=32.768kHz by crystal oscillation
mode
• System clock set to internal RC oscillation
• frequency variable RC oscillation stopped
•1/2 frequency division ratio.
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz by crystal oscillation
mode.
• System clock set to 1MHz with frequency
variable RC oscillation
• Internal RC oscillation stopped
• 1/2 frequency division ratio.
4.5 to 5.5
2.2 to 4.5
4.5 to 5.5
2.2 to 4.5
0.38
1.0
mA
0.19
0.8
1.15
4.2
0.57
3.0
IDDHALT(10)
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz by crystal oscillation
4.5 to 5.5
21
77
mode.
IDDHALT(11)
• System clock set to 32.768kHz side.
• Internal RC oscillation stopped
• frequency variable RC oscillation stopped
2.2 to 4.5
6
70
• 1/2 frequency division ratio.
μA
HOLD mode
consumption
current
IDDHOLD(1)
IDDHOLD(2)
VDD1
• HOLD mode
• CF1=VDD or open (External clock mode)
4.5 to 5.5
2.2 to 4.5
0.05
22
0.02
16
Timer HOLD
mode
consumption
current
IDDHOLD(3)
IDDHOLD(4)
• Timer HOLD mode
• CF1=VDD or open (External clock mode)
• FmX'tal=32.768kHz by crystal oscillation
mode
4.5 to 5.5
2.2 to 4.5
19
72
5
58
Note 7-1: The consumption current value includes none of the currents that flow into the output Tr and internal pull-up
resistors
F-ROM Programming Characteristics at Ta = +10°C to +55°C, VSS1 = VSS2 = VSS3 = VSS4 = 0V
Parameter
Onboard
programming
Symbol
IDDFW(1)
Pins/Remarks
Conditions
VDD1
• Without CPU current
VDD[V]
min
2.7 to 5.5
Specification
typ
max
unit
5
10 mA
current
Programming
time
tFW(1)
tFW(2)
• Erasing
• programming
2.7 to 5.5
2.7 to 5.5
20
30
ms
40
60
μs
No.A1380-20/25